EdgeSwitch XP - Jumbo Frames
Overview
Readers will learn how to enable Jumbo Frame support on the EdgeSwitch XP.
NOTES & REQUIREMENTS:
Applicable to the latest EdgeSwitch XP firmware on the following models:
- ES-5XP
- ES-8XP
- ES-16XP
Device used in this article:
Maximum MTU Support
The maximum MTU size that the EdgeSwitch XP supports is dependent on the ES-XP model. The EdgeSwitch XP devices support jumbo frames with the following MTU sizes:
-
ES-5XPMaximum MTU size of 9216 bytes. -
ES-8XPMaximum MTU size of 9720 bytes. -
ES-16XPMaximum MTU size of 9720 bytes.
The support for jumbo frames is disabled by default, but can be enabled by following the steps below:
GUI: Access the ES-XP Web UI.
1. Navigate to the Settings tab.
2. Enable the Jumbo frames option in the Switch Settings section.
3. Apply the changes by clicking on the APPLY button.