EdgeSwitch & EdgeSwitch X - UISP Adoption
Overview
Readers will learn how to add an EdgeSwitch or EdgeSwitch X to the Ubiquiti ISP Network and Business Management software (UISP).
- Applicable to the latest firmware on all EdgeSwitch and EdgeSwitch X (ES-X) models.
- More information on the Ubiquiti ISP (UISP) Network and Business Management software can be found on the UISP website.
Table of Contents
Adding the EdgeSwitch to UISP
The first step is to log into UISP server and obtain the UISP key.
1. Navigate to the Devices tab to obtain the UISP key.
2. Select the ▼ icon next to the Add Device button and copy the UISP key to the clipboard.
Devices > Add Device (▼) > Copy UISP key to clipboard
An example key value is:
wss://unms.ubncloud.com:443+aBcDeFgHaBcDeFgH+allowSelfSignedCertificate
1. Navigate to the Settings to add the UISP key to the EdgeSwitch.
Settngs > Services > UISP
2. Change the slider from Disabled to Enabled and paste in the key.
3. Apply the changes.
1. Log back into the UISP server.
2. Navigate to the Devices to authorize the switch and add it to a site.
Removing the EdgeSwitch from UISP
If the EdgeSwitch needs to be disassociated with the UISP server, follow the steps below.
1. Navigate to the Settings to the disable the UISP service.
Settngs > Services > UISP
2. Change the slider from Enabled to Disabled.
3. Apply the changes.
1. Log back into the UISP server.
2. Navigate to the Devices to delete the switch from UISP.