Help Center Help Articles Community RMA & Warranty Downloads Tech Specs

EdgeRouter - SFP/SFP+ and DAC Compatibility List

Translated by AI

Overview

This article provides a list of Ubiquiti and third party SFP and SFP+ modules that are compatible with EdgeRouters.

NOTES & REQUIREMENTS:
Applicable to all EdgeRouter models that are equipped with SFP/SFP+ slots. Please see the Related Articles below for more information.

Ubiquiti SFP/SFP+ Modules and DAC Cables

Back to Top

Ubiquiti branded SFP/SFP+ modules and DAC cables are officially supported and compatible with all EdgeSwitch, EdgeRouter, UniFi Switch and UniFi Security Gateway models which use SFP or SFP+ ports.

Fiber SFP modules (1 Gbps)

  • UACC-OM-MM-1G-D-2 (formerly UF-MM-1G)
  • UACC-OM-SM-1G-S (formerly UF-SM-1G-S)

Fiber SFP+ modules (10 Gbps)

  • UACC-OM-MM-10G-D (formerly UF-MM-10G)
  • UACC-OM-SM-10G-D (formerly UF-SM-10G)
  • UACC-OM-SM-10G-S (formerly UF-SM-10G-S)

Copper SFP modules (1 Gbps and 10 Gbps)

  • UACC-CM-RJ45-1G (formerly UF-RJ-45-1G)
  • UACC-CM-RJ45-10G (formerly UF-RJ-45-10G)

DAC cables (10 Gbps)

  • UACC-DAC-SFP10-0.5M (formerly UDC-0.5)
  • UACC-DAC-SFP10-1M (formerly UDC-1)
  • UACC-DAC-SFP10-2M(formerly UDC-2)
  • UACC-DAC-SFP10-3M (formerly UDC-3)

Third-Party SFP/SFP+ Modules and DAC Cables

Back to Top

The list below includes third-party SFP/SFP+ transceivers that have been tested by community members and/or our testing team. Please note that these should work, but we cannot assure that they will. Some modules will have multiple hardware revisions, and while one revision may work (i.e. v1.0), it's possible that a newer revision (i.e. v1.1, v1.2, etc.) of the same module may not work.

It is also possible that these modules will work with one model (such as the ER-8-XG) but not with another model. Please note that Ubiquiti only offers direct support for Ubiquiti branded SFP/SFP+ modules and DAC cables.

NOTE: Not all third-party modules support DDM/DOM (Digital Diagnostic Monitoring/Digital Optical Monitoring) therefore data like Tx and Rx levels and other statistics will not be shown for those modules in the SFP Information tab.

SFP and SFP+ modules

  • Agilent HFBR 5720AL
  • Avago AFBR-57R6APZ
  • Axiom GLC-T-AX Copper SFP
  • Black Box LFP412
  • Chelsio / JDSU PLRXPL-SC-S43-42B
  • Cisco DS-SFP-FC-2G
  • Cisco DS-SFP-FC-2G-SW
  • Cisco DS-SFP-FC-4G-SW
  • Cisco GLC-LH-SM
  • Cisco GLC-T Copper SFP
  • Cisco GLC-FE-100BX-U
  • Cisco GLC-BX-10U
  • eNet GLC-SX-MM-ENC
  • Finisar FTLF8524P2BNL-LS
  • Finisar FTLF8524P2BNV
  • Finisar FTRJ-8519-7D
  • Finisar FRTJ1319PiBTL
  • IMC AS-TX 1000BASE-T
  • KTI Networks SFP-GLMD-A-A
  • MaxxWave MW-SX-MM-US
  • MikroTik S-3553LC20D
  • MikroTik S-31DLC20D
  • Nortel/Avaya LX AA1419015-E5
  • Nortel/Avaya LX DDI 10km AA1419049-E6
  • Primusit PTR-3012L-20C
  • Robofiber SFP-7000-85
  • TP-LINK TL-SM311LS:1000Base-LX

Direct Attached Copper (DAC)

  • MikroTik SFP-H10GB-CU3M

Tested by community members to be not working:

  • Cisco FET-10G - 10-2566-01

Related Articles

Back to Top

EdgeSwitch - SFP/SFP+ and DAC Compatibility List

Was this article helpful?
0 out of 0 found this helpful